Ciranova Un1co™️ Stain & Finishing Oil

T
UN1CO is a 2 component,1-coat oil from the newest generation using
renewable natural raw materials. Thanks to its special technology
there is only one coat needed to finish your parquet. The combination
of the oil with the hardener results in a fast drying and excellent
chemical and mechanical resistant finish. UN1CO is VOC and Cobalt
free.
Technical data
viscosity +/- 40 sec (Din 4mm)
solid content 100% by weight
density +/- 0,95 kg/l
Cobalt free
voc-free
POT-LIFE +/- 3 hours after adding the hardener
available in 16 colors - see color catalogue
preparation
Sand the surface with grain 100-120 and remove afterwards the sanding
dust.
TIP: for a more intensice coloring of the wood, slightly wetten the
floor first.
USER TIPS
Mix the oil with the hardener (100/30) and let the product rest for
about 10 minutes. UN1CO can be applied by brush, cloth or sponge.
Let the productdry for a few minutes. and remove the superfluous oil within 15 minutes with a white pad or cloth untill the surface doesn’t stick anymore.
Check afterwards if the surface feels handdry.
Drying times
24 hours drying depending on the type of
wood, the temperature, the humidity.
applying quantity
ATTENTION : UN1CO needs +/- 2 weeks to fully cure. Don’t use any
water or maintenance products on the wood during this period.
24 products